The Popular Axxo Secrets on how to RIP DVD

Ripping a DVD to xvid or divx avi is really quite easy, if you have the right tools. You’ll first need to download DVD decrypter and auto gordian knot (autogk). DVD decrypter allows you to rip the raw DVD video and audio data off of your disk drive, decrypt the CSS protection, and finally remove any other protection schemes, such as Macrovision. AutoGK is a package of codecs and a GUI interface that will take the raw DVD data through an AV processing pipeline to produce a single windows video file.

Step 1: RIP

Put in a DVD and launch DVD Decrypter. Choose IFO (Information File) mode:
( Figure 1 )

Now make sure you’ve selected a destination for your files:
( Figure 2 )

Now you need to find which program chain to rip (PGC). Pick the one that’s the longest, or in the case of a TV dvd, the episode you want to rip:
( Figure 3 )

Everything’s set up. Just click the green arrow and wait about twenty minutes, after which you will have a set of files which look like this:

VTS_01_0.IFO
VTS_01_PGC_07 – Stream Information.txt
VTS_01_PGC_07_1.VOB

The whole ripping process shouldn’t take more than 5 minutes.

Step 2: ENCODE

Launch AutoGK and select the first .vob that you just ripped as an input file, and set an output file name:
( Figure 4 )

Now you need to select audio (choose the first one) and subtitles, if any:
( Figure 5 )

If you’re ripping a TV, set the preferred size to 350MB, if you’re ripping a movie, choose either 700MB or 1400MB, depending on your preference:
( Figure 7 )

Finally, click on advanced settings and choose MP3 VBR 128kbs:
( Figure 8 )

Then click “add job” and “start.” After all this, you’ll have a log that looks like the following:

[04/18/2008 9:07:27 AM] AutoGK 2.26
[04/18/2008 9:07:27 AM] OS: WinXP (5.1.2600).2
[04/18/2008 9:07:27 AM] Job started.
[04/18/2008 9:07:27 AM] Input file: J:\VIDEO_TS\VTS_01_0.IFO
[04/18/2008 9:07:27 AM] Output file: J:\Output.avi
[04/18/2008 9:07:27 AM] Output codec: XviD
[04/18/2008 9:07:27 AM] Audio 1: Unknown language AC3 2ch
[04/18/2008 9:07:27 AM] Subtitles: none
[04/18/2008 9:07:27 AM] Format: .AVI
[04/18/2008 9:07:27 AM] Target size: 350Mb
[04/18/2008 9:07:27 AM] Custom audio settings: VBR MP3 with average bitrate: 128Kbps
[04/18/2008 9:07:27 AM] Started encoding.
[04/18/2008 9:07:27 AM] Demuxing and indexing.
[04/18/2008 9:08:30 AM] Processing file: J:\VIDEO_TS\VTS_01_PGC_04_1.VOB
[04/18/2008 9:08:30 AM] Source resolution: 720×480
[04/18/2008 9:08:30 AM] Found NTSC source.
[04/18/2008 9:08:30 AM] Source aspect ratio: 4:3
[04/18/2008 9:08:30 AM] Analyzing source.
[04/18/2008 10:28:40 AM] Source is considered to be hybrid (mostly NTSC).
[04/18/2008 10:28:40 AM] Looking for optimal hybrid thresholds.
[04/18/2008 10:28:45 AM] Found threshold of: 1.38
[04/18/2008 10:28:45 AM] Output will contain 38690 frames
[04/18/2008 10:28:45 AM] Decoding audio.
[04/18/2008 10:29:16 AM] Normalizing audio.
[04/18/2008 10:29:28 AM] Encoding audio.
[04/18/2008 10:31:57 AM] Audio1 size: 17,708,400 bytes (16.89 Mb)
[04/18/2008 10:31:57 AM] Overhead: 1,547,648 bytes (1.48 Mb)
[04/18/2008 10:31:57 AM] Video size: 347,745,552 bytes (331.64 Mb)
[04/18/2008 10:31:57 AM] Running compressibility test.
[04/18/2008 10:35:01 AM] Duration was: 3 minutes 4 seconds
[04/18/2008 10:35:01 AM] Speed was: 12.61 fps.
[04/18/2008 10:35:01 AM] Compressibility percentage is: 55.96
[04/18/2008 10:35:01 AM] Chosen resolution is: 560×416 ( AR: 1.35 )
[04/18/2008 10:35:01 AM] Predicted comptest value is: 73.79%
[04/18/2008 10:35:01 AM] Running first pass.
[04/18/2008 11:02:56 AM] Duration was: 27 minutes 55 seconds
[04/18/2008 11:02:56 AM] Speed was: 23.10 fps.
[04/18/2008 11:02:56 AM] Expected quality of first pass size: 76.04%
[04/18/2008 11:02:56 AM] Running second pass.
[04/18/2008 11:42:42 AM] Duration was: 39 minutes 46 seconds
[04/18/2008 11:42:43 AM] Speed was: 16.22 fps.
[04/18/2008 11:42:43 AM] Job finished. Total time: 2 hours 35 minutes 15 seconds
====================================================

Step 3: WATCH

You’re done. Delete all the non .avi files and enjoy the fruits of your ripping.

Figure 01

Figure 02

Figure 03

Figure 04

Figure 05

Figure 07

Figure 08

15 thoughts on “The Popular Axxo Secrets on how to RIP DVD

  1. Alx

    Thanks Dude, now i can host my own torrent Axxo like Quality,

    * from Egypt…..hoping more great post from your site *

    Reply
  2. kopyamoz

    grb pare. wow! the best. ganyan lng pala kadali. maraming salamat.. thank you so much from the bottom of my hypothalamus. more power. anyway may alam ka bang video converter file para sa psp. ung may high quality and di maxadong malaki ang size ng file. please email me: [email protected]

    Reply
  3. master croiz

    search for handbrake for windows. install it. copy the installation folder to a usb (if u want it to be used as portable. a 2 hr movie, and i set it for 500mb 560×296 resolution and still having a great quality. try it. satisfaction guaranteed

    Reply
  4. another fan of axxo

    Hi! I find your software very helpful and user friendly, however I
    have to encode in the AutuoGK the chapters one by one. Do I have to
    encode it one by one? And do I have to get software just to combine
    all the chapters? And is it a movie DVD or did I do something wrong?

    Reply
  5. admin Post author

    it will continue, check step 2

    Step 2: ENCODE
    Launch AutoGK and select the first .vob that you just ripped as an input file, and set an output file name

    Reply
  6. Cybersupam

    I have so many doubts if Mr.aXXo really uses these 2 tools for ripping 3-4gb DVD to 700mb avi files. But if these work than thanks for this informative article.
    Yeah, I tried many converters but only use AutoGK n Vidsplitter that let us to select size of 700mb for output files. So now I shall try with DVD Decrypter as the above article.

    Reply
  7. thenyproject

    In step 2, the encoding process, you wrote to choose the VOB file as the input. Didn’t you mean the IFO file?

    I just chose the IFO and ripped S01E05 of Dexter and it worked perfectly. I think you meant IFO, am I wrong?

    Reply
  8. UltimateChaos

    This would work with the DvD decrypter if it would update. I had a problem with newer DvD’s and switched to DvDFab.

    Reply
  9. Longboarder1

    You ctuallyu need to select the .ifo file, not the .vob. search “Rip dvds like axxo” in google and click the first link.

    Reply

Leave a Reply to kopyamoz Cancel reply

Your email address will not be published. Required fields are marked *